You can also download a PDF version of this guide from here
Setup Guide
The FaxCop acts as a filter between the wall socket and the fax machine. Setup only takes a minute.
1) Disconnect the telephone lead from the wall socket and plug it into the FaxCop's port labelled Fax.
(do not disconnect any cables from the back of the fax machine)
2) Take the telephone lead supplied and plug it into the FaxCop's port labelled Line In and plug the other end into the wall socket.
3) Power up the FaxCop with the power adapter supplied.
4) Set your preferred filter mode. (AR or RD)
5) Check the bypass LED is off.
Important Notes
The FaxCop is designed to be used on a direct fax line.
If you use a switchboard and the fax line is an extension on the switchboard, you will need to adjust the settings so as the fax line operates independently of the switchboard.
If you need help or advice on this please feel free to contact us